Table of Contents
Advertisement
CHAPTER 1: K3000 CONTROLLER INSTRUCTIONS
1.1
Using the K3000
Pressed Individually: Scroll
menu, programming options.
Pressed Simultaneously:
Launches polish.
Scan programmed
menu items.
Product Button LED: Lit when button
is active. All buttons with a common
setpoint light simultaneously.
ON/OFF
Press ON/OFF button fryer heats to setpoint or idle temperature and displays: COOL or DROP.
•
Cooking
Fryer displays COOL or DROP
•
COOL display: Press product button; fryer heats to setpoint and displays DROP.
•
Press product button and drop product.
•
DROP display: Press product button and drop product. (Product buttons 1-5 and 11-15 start cooks on the left
•
display. Products 6-10 and 16-20 start cooks on the right display.)
DONE display: Press product button to cancel alarm.
•
Press and hold product button to cancel cook cycle.
•
Responding to Polish Prompt
Controller displays Polish Now, alternating with Yes No.
•
Press Yes (button under Yes display) and the polish cycle launches.
•
Controller displays Cool after polish cycle.
Controller Button Navigation
Product: Active when adjacent LED is lit. Press to launch cook cycle. Press and hold to stop a launched cook
•
cycle. Press at end of cook cycle to halt alarm.
Scan: Press once, all product buttons are lit; Select Product displayed. Press product button to view product
•
name. Press Scan again to repeat. Press Scan twice to return to normal operation.
Left/Right Arrows: Navigate options in left display.
•
Up/Down Arrows: Navigate options in right display. Press the up/down arrow simultaneously to change to a
•
second language if one is selected in setup.
Exit Cool: Set fryer's cook cycle exit temperature to 250°F (121°C) or setpoint.
•
Thermometer: Fryer ON: Press and release for setpoint/left; vat temp/right.
•
Thermometer: Fryer OFF: Press to display temperature, time, date, system version, K3000 version and circuit
•
board versions.
Checkmark: Fryer OFF: Press and hold 3 seconds: Scroll filter usage; Press and hold 10 seconds: Product
•
setup.
Checkmark: Fryer ON: Respond to prompts. Press and release: Check recovery. Press and hold 4 seconds:
•
Info Mode.
Filter: Press and release: Cooks remaining to filter cycle. Press and hold: Filter options: Filter and Dispose.
•
Exit Cool Mode
Check actual,
250°F (121°C);
setpoint
Return to setpoint.
temperatures and
software version
ON/OFF
Blue product buttons
start cooks in left
display. Press to start
a cook cycle.
Enter codes, respond to
left-display prompts.
Check recovery. See
page 1-2.
Access filter
menu. See
page 1-6.
White product buttons
start cooks in left
display. Press to start
a cook cycle.
1-1
Pressed Individually:
Scroll displayed menu and
programming options.
Pressed Simultaneously:
Changes to second
language if set up.
ON/OFF
Advertisement
Table of Contents
