Mitsubishi MELESEC-ST User Manual page 97

10 MOUNTING AND INSTALLATION
10 - 5
(2) Mounting the base modules
Tilt the top of the base module
toward you, and hook the
groove of the module rear on
the DIN rail bottom.
Push the base module in the
direction of arrow until it clicks
and is locked by the DIN rail.
When the base module is
securely fixed to the DIN rail,
slide the base module to the left
to combine it with the head
module (or base module).
Mount the second and later
base modules as described
above.
Make sure that all base
modules are securely fixed to
the DIN rail.
Complete
POINT
Securely combine the head module and base module or the base modules so that
no gap exit between them.
(3) Mounting the base module markers and wiring markers
(a) Push the base module markers into the base module's bottom recess where
the slice module will be fitted.
Head module
Head module
Base module markers
Base module
MELSEC-ST
DIN rail
Base module
Groove of base
module rear
10 - 5