Mitsubishi MELESEC-ST User Manual page 51

5 POWER DISTRIBUTION MODULES
5 - 6
I = 0.41 + (0.095 5) + (0.15 5) + 0.09 + 0.06 + (0.095
As the maximum rated output current 2.0A of the bus refreshing module is less than
the total 5VDC internal current consumption, the following bus refreshing module must
be mounted newly.
In this system configuration, replace the ST1PPD with the ST1PSD.
Total current consumption = 1.725(A)
1: Bus refreshing module (for powering head module)
2: Bus refreshing module (for extension)
REMARK
Using optional GX Configurator-ST, whether the power capacity is sufficient for the
total 5VDC internal current consumption or not can be checked on the following
monitor screen.
For details, refer to the GX Configurator-ST Operating Manual.
MELSEC-ST
4) = 2.165 (A)
Added bus refreshing module
Total current
consumption = 0.380(A)
5 - 6