10 MOUNTING AND INSTALLATION
10.2 Mounting the Modules
10 - 4
This section explains how to mount the head module, slice modules, end bracket, end
plate, etc.
(1) Mounting the head module
Tilt the top of the head module
toward you, and hook the
groove of the module rear on
the DIN rail bottom.
Push the head module in the
direction of arrow until it clicks
and is locked by the DIN rail.
Make sure that the head
module is securely inserted in
the DIN rail.
Complete
POINT
After mounting all of base modules, attach the end bracket to the left of the head
module. On the left side of the head module, leave a space for mounting the end
bracket.
Head module
DIN rail
Groove of head
module rear
MELSEC-ST
10 - 4