Disconnecting An Extension Module; Other Tasks - Pilz PMCenergy SD Operating Manual

Extension module (option)
7.5
7.6
Operating Manual PMCenergy SD
1004547-EN-01
Fig. 17: Discharging extension module 1 (top side of the housing)
On extension module 2, undo the connector from X2, insert it into X2 on extension
⌧
module 1 and wait for approx. 30 seconds.
Extension module 1 will be discharged.
Fig. 18: Connecting a Dynamic Energy Storage Unit and two extension modules
On extension module 2 undo connector X3 and insert it into X2.
⌧
The Dynamic Energy Storage Unit and two extension modules are connected.

Disconnecting an extension module

See Dynamic Energy Storage Unit (

Other tasks

See Dynamic Energy Storage Unit (
Chapter 5.5, page 24).
Chapter 6, page 26).
30