Other tasks
6
6.1
6.2
6.3
6.4
Operating Manual PMCenergy SD
1004547-EN-01
O
THER TASKS
Cleaning the Dynamic Energy Storage Unit
There is a danger of fatal injury.
Cleaning fluid can penetrate the housing and cause a short-cir-
cuit or damage components.
Only clean the housing when the unit is completely de-ener-
⌧
D
!
A N G E R
gised.
Just wipe down the housing with a damp cloth.
⌧
There is a danger of fatal injury.
Cleaning agents which contain alcohol can cause explosions.
Only use alcohol-free cleaning agents.
⌧
D
!
A N G E R
There is a risk of injury!
Touching hot surfaces may result in burns.
Switch off the Dynamic Energy Storage Unit for at least 30
⌧
minutes before cleaning it.
W
!
A R N I N G
Only use alcohol-free cleaning agents.
⌧
Only clean the Dynamic Energy Storage Unit when it is completely de-energised.
⌧
Just wipe down the Dynamic Energy Storage Unit with a damp cloth.
⌧
Maintenance of the Dynamic Energy Storage Unit
The Dynamic Energy Storage Unit requires no maintenance.
If the Dynamic Energy Storage Unit has been de-energised for more than 1 year, it
must be conditioned
(
Page 25, chap. 5.6 "Conditioning the Dynamic Energy Storage Unit").
Repairing Dynamic Energy Storage Unit
A faulty Dynamic Energy Storage Unit can only be repaired by its manufacturer.
Disposing of an Dynamic Energy Storage Unit
Disconnect the Dynamic Energy Storage Unit (
⌧
ing the Dynamic Energy Storage Unit").
Remove the Dynamic Energy Storage Unit.
⌧
Return the Dynamic Energy Storage Unit to the manufacturer.
⌧
Page 24, chap. 5.5 "Disconnect-
26