Table of Contents
Advertisement
Commissioning
5
5.1
Basic information
Operating Manual PMCenergy SD
1004547-EN-01
C
OMMISSIONING
There is a danger of fatal injury.
Danger from electric shock.
The Dynamic Energy Storage Unit may become live if used in
an incorrect area.
D
!
A N G E R
Do not use the Dynamic Energy Storage Unit in IT networks
⌧
(IT (Isolated Terra) = floating supplies.)
There is a risk of injury!
The housing may heat up to 80° C in operation.
If you have to work on the Dynamic Energy Storage Unit,
⌧
wear heat-resistant safety gloves.
W
!
A R N I N G
Connecting the Dynamic Energy Storage Unit
• The places of operation must be dry and dust-free.
• The air supplied must not contain any electrically-conductive dust, gas or vapour
which could impair functionality. Corresponding remedial measures must be taken
if necessary.
• The Dynamic Energy Storage Unit may only be operated in ambient temperatures
from 0 - 40 °C.
• The Dynamic Energy Storage Unit may only be operated in connection with an ap-
plication which has direct access to the DC link capacity.
• The connecting wires (cross-section to comply with your national standards) be-
tween the Dynamic Energy Storage Unit and the application must not be longer
than 1.0 m, must be laid as a twisted pair and must be proof against short-circuits.
Fig. 6: Connection diagram
1
Application (servo amplifier)
2
Dynamic Energy Storage Unit
19
Advertisement
Table of Contents
