Extension module (option)
7
7.1
7.2
7.3
Operating Manual PMCenergy SD
1004547-EN-01
E
XTENSION MODULE
The optionally available extension module (EM) increases the Dynamic Energy Stor-
age Unit's energy storage capacity. It is supplied with a connecting cable and polar-
ised connectors.
Technical data
Ambient conditions
Usable storage capacity
Width
Depth
Height
Weight
Transport / Storage / Installation
See Dynamic Energy Storage Unit (
Connecting an extension module to the Dynamic Energy Storage
Unit
There is a risk of damage.
A Dynamic Energy Storage Unit which is connected to the DC
link can destroy the extension module.
Before connecting an extension module, detach the Dynamic
⌧
Energy Storage Unit from the DC link (
necting the Dynamic Energy Storage Unit").
Disconnect the Dynamic Energy Storage Unit from the DC link.
⌧
(
Page 24, "Disconnecting the Dynamic Energy Storage Unit").
... (next page)...
⌧
(
)
OPTION
See Dynamic Energy Storage Unit
(
Chapter 2.7, page 13)
approx. 1.6 kWs (EM 2.0A20)
approx. 3.2 kWs (EM 2.0A20)
100 mm
201 mm
300 mm
approx. 4.1 kg (EM 2.0A20)
approx. 6.2 kg (EM 2.0A2020)
Chapter 4, page 16).
Page 24, "Discon-
27