Page 1
Head rest 10-230 Head rest 10-230 including versions Version 10-230 10-230-B 10-230-F 10-230-NO 10-230-Steris 10-230-T 10-230-PED C-C: 106 mm C-C: 171,5 mm C-C: 106 mm C-C: 140 mm C-C: 171,5 mm Pole: 20x20mm 18 mm 18 mm Ø: 15 mm Ø:...
Page 2
Intended use Head rest intended for support and positioning of patient head during e.g. ENT-surgery. The product is to be used by medical professionals within a medical facility. Safety regulation Maximum load: 15 kg in even distribution, corresponding to a patient weight of 200 kg, according to EN 60601-1 and EN 60601-2.
Page 3
User instruction Installation Position adjustment...
Page 4
Maintenance Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel only. Altering the construction without a written consent from the manufacturer, is strictly forbidden. Adjusting the lock mechanism Tool: 2 mm hex key. Cleaning Clean with antiseptic detergent with pH 6 – 8 and warm water. Ethanol can be used on metal surfaces. Wipe dry with soft cloth.
Page 6
Material Head rest Stainless steel Polyurethane Storage and Transportation Ambient conditions Dimension Version UDI-DI Weight (H x W x L) 10-230 07350111831103 2,8 kg 90-220 x 290 x 420 mm 10-230-B 07350111831110 2,8 kg 90-220 x 290 x 420 mm 10-230-F 07350111831127...
Page 7
Reison Medical AB Eriksbergsvägen 32A 734 92 Hallstahammar SWEDEN +46 (0)220 433 99 order@reison.se info@reison.se...
Need help?
Do you have a question about the 10-230 and is the answer not in the manual?
Questions and answers