Table of Contents
Advertisement
1. PRODUCT INFORMATION
1.1 Product Description
The TP12KSC-DX 2-post hydraulic lift is a surface mounted, frame contact lift incorporating the latest safety
technologies. Designed and manufactured for a lifting capacity of 12,000 lbs. (Max 3,000 lbs. per Lifting Arm)
and is fully capable for lifting vehicles, vans, light & heavy trucks by safely holding them in an elevated position.
The TP12KSC-DX incorporates symmetric swing arms for symmetrical lifting configuration.
The TP12KSC-DX 2-post hydraulic lift consists of a fixed
structural unit (Crossbeam, Columns & Uprights), the
mobile units (Carriages and Lift Arms), and the Hydraulic
Power System and mechanical Safety Latch Release
device.
A. Crossbeam
B. Column
C. Carriage
D. Lifting Arm
E. Power Unit
F. Overhead Safety Shut-Off Bar
G. Single Point Safety-Latch Release
H. Upright (column extension)
1.2 Technical Data
Capacity
Height Overall
Width Overall w/ Power Unit
Max Lifting Height
Max Lifting Height w/ Tallest Adaptor
Width Between Columns
Min Pad Height
Drive Thru Clearance
Swing Arm Reach – Min / Max
Electrical Power
Max Operating Pressure
12,000 lbs. (
Max 3,000 lbs. per Arm)
168-1/2"
151-5/16"
75"
80"
122"
4-7/8"
109"
37-5/8" – 57"
220V, 20 Amp, 1 Phase
3,050 PSI
8
TP12KSC-DX
July 2018-A
Advertisement
Table of Contents
