Table of Contents
Advertisement
Product Description
The iDEAL TLX 7000 Floor Rail Kit is an option accessory designed for insufficient floor surfaces
such as uneven and/or rough concrete floor surfaces, allowing for proper & safe lifting operation. The
Floor Rail Kit can also be utilized to reduce any wheel travel marks or scratches for polished and/or
epoxied type floor surfaces.
The Tilt Lift's travel wheels bear the entire weight of the lifted vehicle which can leave
unwanted markings or scratches on polished or epoxied concrete floors.
The manufacturer is not responsible for any damages or injuries resulting of incorrect
assembly or usage of the rail kit for uneven or unsuitable floor surfaces.
Never use on unstable floors, such as asphalt, muddy grounds, unlevel surfaces, not
reinforced, including rock or stone pavements with holes or surfaces with a tendency to
collapse.
The manufacturer and seller are not responsible for any injuries or damages that are the
result of incorrect usage of the product on an insufficient floor surface.
Specifications
Site Selection
·
LIFT LOCATION: Check layout dimension against floor plan requirements making sure that adequate
workspace is available. The floor surface on which the lift is to be used should be smooth and flat as
possible.
·
OVERHEAD OBSTRUCTIONS: The area where the lift will be located should be free of overhead
obstructions such as heaters, building supports, electrical lines etc.
Surface Condition
·
Do not use the Lift on any type of asphalt or soft surface. Ensure lift is placed on a dry, oil & grease
free, level concrete surface capable of supporting the weight of the Lift with a vehicle. Do not use Lift
on concrete expansion seams or cracked, defective concrete. Failure to accomplish the foundation
surface requirements may cause lift instability, which could result in personal injury.
Operating Conditions
·
Operate lift only between temperatures of 41° - 104° F
TECHNICAL INFORMATION
Specifications
Lift Capacity:
Min. Lift Height
Lift Weight
Floor Kit Ship Weight 12 lbs.
All Other Tilt Lift Dims Unchanged.
BEFORE USING
TLX-7000-FLRAILKIT
TLX-7000 w/ Floor Rail Kit
7,000 lbs.
4-5/8"
121 lbs.
5
Aug 2021
Advertisement
Table of Contents
