Table of Contents
Advertisement
4. Locate T-Fitting & shortest hydraulic hose. Connect the longest hose to top of T-fitting,
which is to be positioned behind the power unit bracket. Then, connect the shortest hose
to the side of T-fitting as shown. (Figs. 8 & 9)
5.
Connect medium length hose (with 90 degree fitting) to main side cylinder, ensuring to
route through leg gussets, as shown in Fig. 7. Route hose up to T-fitting and tighten.
6.
Install Hose Covers on sides of columns, using provided hardware. (See Exploded
View at back of Manual for location details.)
Fig. 8
Fig. 9
18
TP12KSC-DX
July 2018-A
Advertisement
Table of Contents
