Installation - STIEBEL ELTRON Tatramat EO 15 P Operation And Installation

English

INSTALLATION

– Unpressurised connection:
Only install an unpressurised tap.
9.3 Installation
9.3.1 Installation information
Match the colour designation of the tap connection pipes to that of the water heater.
– Pressurised connection:
— Route the connections to the second tap on site, for example in a 10 mm copper pipe.
— Information regarding plastic pipework systems:
Risk of damage
!
If plastic pipework systems are used, take into account the most extreme operating
and fault conditions that could occur at the appliance; see chapter "Specification /
Fault conditions".
EN
41