Labnet FastPette Pro Quick Start Manual page 2

Intended Use
The pipet controller is a device
intended for general laboratory
0.5 mL to
100 mL
use only, for pipetting liquids with
the use of measuring pipets. It
can work with all types of glass or
plastic pipets in the volume range
from 0.5 mL to 100 mL.
Battery Charge
The batteries may be charged only
with the original charger. Using
chargers other than the original
FastPette
one may damage the battery.
Pro only
Fastepette™ Pro: 3 NiHM type AAA
are delivered with the product and
need to be installed before the
first use.
FastPette V2: NiHM battery is
installed in the product.
Use country specific adapter.
US
EU
Charge the batteries either
on charging stand or directly
connecting the charger to the
socket. Input: 100-240V, 50/60Hz,
AU
UK
0.2A; output: DC 9V.
FastPette
Pro only
OR
Charging process is indicated by:
FastPette Pro: successive lighting
of "bars". Full charging time: 7 to
8 hours. The batteries are charged
when all 3 "bars" are displayed
simultaneously.
FastPette V2: continuous lighting
of the LED indicator, which stops
after the charger is disconnected.
Full charging time: up to 11 hours.