Labnet FastPette Pro Quick Start Manual page 3

OR
OR
Filter Replacement
Speed Setting
FastPette™ Pro: Press the SPEED
button until the display shows
the correct speed – HIGH or LOW.
FastPette V2: Change position of
the SPEED switches.
• HIGH speed - fast aspirating
recommended for pipets <5 mL
• LOW speed - slow aspirating
recommended for pipets >5 mL
and foaming liquids
Manual Speed Control
• Speed can be controlled
manually by pressing the
trigger buttons
Mode Control
FastPette Pro: Press the MODE
button until the display shows
the correct mode – BLOW OUT
(arrow) or GRAV (drop).
FastPette V2: Change position of
the MODE switches.
NOTE: Pump is not working when
in GRAV mode.