Table of Contents
Advertisement
Getting Started
Set Up the System Access Point (MXCWAPT)
1.
Connect the access point to a Power over Ethernet (PoE) source to turn on the device.
2.
If prompted, select the operating region on the menu for RF coordination (some model variations).
3.
Open the web application in a browser and set an Admin passphrase.
4.
Wait while the access point scans the area for the best available channel.
5.
Once the channel is selected, the default wireless network (00) is ready for the MXCW microphones.
Shure Incorporated
6/86
Advertisement
Table of Contents
