Table of Contents
Advertisement
Resetting Devices
Shure devices are designed to work together right out of the box. Prior to a new installation, or during troubleshooting, it may
be useful to reset devices to ensure system compatibility.
The system provides 2 reset levels to choose from:
•
Network reset: Clears only network settings and provides a fresh network connection.
•
System reset: Clears all device and system settings to reset the device to default factory settings.
From the Hardware
Access Point
Conference Units
Networked Charging Sta
tion
From the Software
Access Point
Conference Units
Press and hold the recessed reset button.
•
Network reset: Press and hold for 5 seconds to reset any network settings and refresh
network connection.
•
System reset: Press and hold for 10 seconds to reset the device to default factory set
tings.
See Access Point Transceiver (MXCWAPT) for more details on LED behaviors during a
reset.
1.
Access the technician menu by tapping the
tings page, hold down the volume control knobs and tap the right side of the screen.
2.
Go to the
information screen and tap Factory reset.
Press and hold the recessed reset button.
•
Network reset: Press and hold for 4 seconds to reset any network settings and refresh
network connection.
•
System reset: Press and hold for 8 seconds to reset the device to default factory set
tings.
Settings > Device reset . Select Reboot device or Restore facto
Go to
ry defaults.
Go to Devices and select a device. From the device properties panel, open
more options and select Factory reset.
Shure Incorporated
gear icon. While at the top of the set
63/86
Advertisement
Table of Contents
