Table of Contents
Advertisement
2.
Repeat for the rest of the group mixes (B - H).
3.
Open the Outputs tab.
4.
For the first Dante output channel, select Mix A for the input source.
5.
Repeat for the rest of the outputs.
More than 8 Active Speakers
To record more than 8 active speakers at a time, route the 8 microphone slots (instead of seats routed to mixes) to the output
channels.
Keep in mind that the channels will not be permanently assigned to certain participants. The wireless 8 microphone slots 'fill up'
starting with slot 1 and increasing with more active microphones. (Slot 1 is always filled whenever a microphone is active.)
Therefore this method allows clean recordings, but the labeling will not follow the participants by seat.
1.
Set the number of active microphones and delegate microphones to 8 (maximum).
2.
Open the Outputs tab.
3.
For the first Dante output channel, select Microphone slot 1 for the input source.
Shure Incorporated
53/86
Advertisement
Table of Contents
