Subscribe to Our Youtube Channel
Related Manuals for Shure Microflex MX415DUAL
Summary of Contents for Shure Microflex MX415DUAL
- Page 1 MX415DUAL Dual-Capsule Gooseneck Microphone User guide for MX415DUAL. Version: 0.1 (2021-G)
-
Page 2: Table Of Contents
Shure Incorporated Table of Contents Installation MX415DUAL Dual-Capsule Gooseneck Microphone Dimensions General Description Accessories Features Specifications Interchangeable Cartridges Windscreen Certifications 2/10... -
Page 3: General Description
MX415DUAL Dual-Capsule Gooseneck Microphone General Description ® The Shure Microflex MX415DUAL dual-capsule gooseneck microphone features two electret condenser cartridges mounted in a single low-profile housing and two preamp-equipped outputs providing redundant audio for critical, multi-feed live sound and professional broadcast applications. With a 15” overall length, the MX415DUAL includes a flexible top gooseneck section for optimal placement, and includes all the mounting accessories required for installation into a lectern or tabletop configura... -
Page 4: Interchangeable Cartridges
Shure Incorporated Interchangeable Cartridges Microflex microphones use interchangeable cartridges that allow you to choose the polar pattern for different installations. Windscreen • Snap into place when fully seated. • To remove, grip under the wider sides of the foam and gently pull. -
Page 5: Installation
Shure Incorporated Installation Mount the microphone using a flange or shock mount. 5/10... - Page 6 Shure Incorporated Important: The dot on the microphone and TQG connector indicates which cartridge is connected to which connector. The in cluded RK100PK phantom-powered preamps converts the TQG connector to an XLR output. A13HDB Flange: Mark and drill 3 starter holes for the screws using the flange as a template. Secure the flange to the mounting surface with screws.
-
Page 7: Dimensions
Shure Incorporated Dimensions Accessories Mic Swivel Adapter A57F Extension Tube A26X Cast Mounting Flange A13HDB Locking Mounting Flange RPM640 Shock Mount A400SM Inline Preamps (2) RK100PK Preamp Mounting Plates (2) RPM40PREMNT Retained Foam Windscreen RK415DWS Veraflex Windscreen A415DGWS Storage Pouch... -
Page 8: Specifications
Shure Incorporated Specifications Cartridge Type Electret Condenser Frequency Response 50–17000 Hz Polar Pattern Cardioid Output Impedance 180 Ω Output Configuration Active Balanced Sensitivity @ 1 kHz, open circuit voltage –35 dBV/Pa (18 mV) Maximum SPL 1 kHz at 1% THD, 1 kΩ load 124 dB... - Page 9 Shure Incorporated Weight 205 g (7.23 oz) Environmental Conditions Operating Temperature 18 – 57°C (0 – 135°F) Storage Temperature 29 – 74°C (20 – 165°F) Relative Humidity 0 – 95% Power Requirements 11–52 V DC, 2.0 mA 9/10...
-
Page 10: Certifications
Meets essential requirements of all applicable European Directives. Eligible for CE marking. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance...
Need help?
Do you have a question about the Microflex MX415DUAL and is the answer not in the manual?
Questions and answers