Table of Contents
Advertisement
• Mac: ctrl + cmd + f
Using a Passphrase
The access point web application must have an Admin passphrase created when an access point is powered on for the first
time, or after a factory reset. The passphrase may be changed or removed after the system setup is complete.
To change or remove a passphrase, open the
Note: Anyone can access the web application from a computer or mobile device connected to the network when a passphrase is not enabled.
Wireless and RF Management
Microflex Complete Wireless provides automatic, encrypted wireless transmission for up to 125 conference units at a time. The
access point scans and selects the best operating channel across the wireless 2.4 GHz and 5 GHz frequency bands, including
DFS channels.
Wireless Operating Distance
The RF power level determines the operating distance between the access point and conference units. Set the RF power level
according to the size of the microphone installation.
Setting RF Power
Select the RF power from the web application by going to Wireless > RF power.
RF Coverage from the Access Point
Transmitter
Setting
Power (mW)
Maximum (default)
25
High
13
Medium
5
Low
1
Mute
0
Note: Maximum transmitter power varies by region.
Settings menu in Admin view and select the Permissions tab.
Variable Operating Distance
Coverage
Distance
Typical Application
from APT
150 ft (45.
Ballroom and auditorium spaces
7 m)
100 ft (30.
Large meeting spaces and lecture halls
5 m)
50 ft (15.2 m)
Conference, training and multipurpose rooms
25 ft (7.6 m)
Small video-conference rooms and boardrooms
0 ft (0 m)
Long meeting breaks or access point not in use
Shure Incorporated
35/86
Advertisement
Table of Contents
