Subscribe to Our Youtube Channel
Related Manuals for Shure Microflex MX424/N
Summary of Contents for Shure Microflex MX424/N
- Page 1 MX400 Series Gooseneck Microphones Online user guide for Shure Microflex MX400 Series miniature gooseneck-mounted electret condenser microphones. Version: 5 (2019-J)
-
Page 2: Table Of Contents
Shure Incorporated Table of Contents Microphone Placement MX400 SeriesGooseneck Microphones Permanent Installation General Description Flange Shock Mount Interchangeable Cartridges Specifications Snap-Fit Windscreen Certifications Preamp Gain 2/11... -
Page 3: Mx400 Seriesgooseneck Microphones
General Description ® Shure Microflex MX400S Series microphones are miniature gooseneck-mounted electret condenser microphones designed primarily for speech and vocal pickup. They can be mounted on lecterns, pulpits, or conference tables. All models include a preamplifier and are available with interchangeable cardioid, supercardioid, or omnidirectional cartridges. -
Page 4: Snap-Fit Windscreen
Shure Incorporated Microflex microphones use interchangeable cartridges that allow you to choose the polar pattern for different installations. Snap-Fit Windscreen • Snap into the groove below the cartridge. • To remove, spread the gap with a screwdriver or thumbnail. 4/11... -
Page 5: Preamp Gain
Always use the supplied windscreen or optional metal windscreen to control breath noise. • If four or more microphones will be open at the same time, use of an automatic mixer, such as the Shure SCM810 or SCM410, is recommended. -
Page 6: Flange
Shure Incorporated Flange Drill a 22 mm (7/8 in.) diameter hole in the desired location. Trace and drill three starter holes for the supplied screws using the flange as a template. Insert the preamplifier through the mounting flange. Slip the mounting flange retaining ring over the bottom of the preamplifier and slide it up until it is flush to the bottom of the flange. -
Page 7: Specifications
Shure Incorporated Specifications Type Electret Condenser Frequency Response 50–17000 Hz Polar Pattern MX412/C, MX418/C Cardioid MX412/S, MX418/S Supercardioid 7/11... - Page 8 Shure Incorporated Output Impedance 180 Ω Output Configuration Active Balanced Sensitivity @ 1 kHz, open circuit voltage Cardioid –35 dBV/Pa(18 mV) Supercardioid –34 dBV/Pa(21 mV) 1 Pa=94 dB SPL Maximum SPL 1 kHz at 1% THD, 1 kΩ load Cardioid 124 dB Supercardioid 123 dB...
- Page 9 Shure Incorporated Environmental Conditions Operating Temperature –18–57°C (0–135°F) Storage Temperature –29–74°C (–20–165°F) Relative Humidity 0–95% Power Requirements 11–52 V DC, 2.0 mA 9/11...
-
Page 10: Certifications
Meets essential requirements of all applicable European Directives. Eligible for CE marking. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance... - Page 11 Shure Incorporated 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: info@shure.de 11/11...
Need help?
Do you have a question about the Microflex MX424/N and is the answer not in the manual?
Questions and answers