Nizn Battery Charge Advanced Setup; Nizn Battery Charge Safety Setup; Nizn Battery Discharge Setup; To Channel Setup - iCharger 308DUO User Manual



NiZn Battery Charge Advanced Setup

Click " " to enter NIZN ADVANCED SETUP interface, see details about setting on Page19 LiPo/LiIo/LiFe
Battery Charge Advanced Setup.


NiZn Battery Charge Safety Setup

Click " " to enter CHARGE SAFETY SETUP interface, see details about setting on Page19 LiPo/LiIo/LiFe Battery
Charge Safety Setup.


NiZn Battery Discharge Setup

Select Program→Discharge to enter Discharge setup interface
Note: 1.The charger first discharges with constant current (CC) according to the user setting then turns
to constant voltage (CV) when it reaches the discharge voltage. In the CV phase the current
gradually falls, and the charger will terminate discharging when the current falls below the
percentage of the configured discharge current.
2. Regenerative mode has three available settings: OFF, To input, To channel, see more details on
Page38 Important Notes.


To Channel Setup

Switch to To channel mode on Regenerative Mode interface, click"
details about setting on Page20 To Channel Setup.


NiZn Battery Discharge Advanced Setup

Click " " to enter NiZn DISCHARGE ADVANCED SETUP interface, see details about setting on Page20
LiPo/LiIo/LiFe Battery Discharge Advanced Setup.


NiZn Battery Discharge Safety Setup

"to enter DISCHARGE SAFETY SETUP interface, see details about setting on Page19 LiPo/LiIo/LiFe
Click"
Battery Charge Safety Setup.


NiZn Battery Cycle Setup

Select Program→ Cycle to enter Cycle setup interface, see details about setting on Page21 LiPo/LiIo/LiFe Battery Cycle
Setup.
Synchronous Balance Charger/Discharger
Discharge Current:
Discharge Voltage:
End Current:
Regenerative Mode:
OFF(default),To input, To channel
"to enter To channel setup interface, see
- 25 -
308DUO V1.1.0
；
0.05A-30A default: 2A
0.9V/Cell-1.6V/Cell
default: 1.1V/Cell
1%-100%; default: 50%
；