Error Messages - iCharger 308DUO User Manual

 Error Messages
Error NO.

Error Messages

02XX "Input over voltage"
03XX "Input under voltage"
04XX "Output over voltage"
05XX "Low battery voltage"
06XX "High battery voltage"
07XX "Output over current(+)"
08XX "Output over current(-)"
09XX "Input over current(+)"
10XX "Input over current(-)"
11XX "The internal temperature is too high"
12XX "The internal temperature is too low"
13XX "Connection check error"
"CH1
14XX
prohibited"
15XX "Battery polarity reversed!"
16XX "Internal control error"
17XX "Exceed safe time limit"
18XX "Exceed safe capacity limit"
19XX "Exceed safe temperature range"
20XX "Output connection broken"
21XX "Balance port connection error"
22XX "Low cell voltage detected on balance port"
23XX "High cell voltage detected on balance port"
"Voltage match error. Balance port sum is lower
24XX
than output."
"Voltage match error. Balance port sum is higher
25XX
than output."
26XX "Number of cells doesn't match the setting"
27XX "Number of cells setting appears low"
28XX "Number of cells setting appears high"
"Balance not needed, Remove connection from
29XX
balance port"
& CH2 common-negative
Synchronous Balance Charger/Discharger
Error Description
The input voltage is too high
The input voltage is too low
The output voltage is too high
The voltage of the connected battery
is too low
The voltage of the connected battery
is too high
Output over current (+)
Output over current (-)
Input over current (+)
Input over current (-)
The internal temperature is too high
The internal temperature is too low
Connection check error
connection Common-negative
CH1&CH2 is prohibited
Battery has been connected with
polarity reversed.
Internal control checking error
Safe time limit is exceeded
Safe capacity limit is exceeded
Safe temperature range is exceeded
Output connection is broken
Balance port has a connection error
Low cell voltage is detected on
balance port
High cell voltage is detected on
balance port
Voltage matched error, the voltage of
the balance port sum is lower than
the output one
Voltage matched error, the voltage of
balance port sum is higher than the
output one
Number of cells connected doesn't
match the setting
Number of cells setting appears low
Number of cells setting appears high
Balance port error, Ni-, Pb does not
need balance port, but voltage of
balance port is detected
- 41 -
308DUO V1.1.0
connected to