iCharger 308DUO User Manual page 42

30XX "Balance required!"
"Auto detect the number of cells failed, please
31XX
connect balance or set cells"
32XX "AD watchdog error"
33XX "Synchronous mode: Channel outputs imbalance"
"This channel is needed to access the resistor or
34XX
bulb load"
35XX "The other channel is occupied"
Synchronous Balance Charger/Discharger
Balance port is unplugged
Check connection or balance port
AD watchdog error
Channel outputs are imbalance in
Synchronous mode
This regenerative channel is needed
to access the resistor or bulb load
The other channel is occupied
- 42 -
308DUO V1.1.0