Checking Corrosion Protection; Returning Simosec Switchgear To Service; Access To The Switchgear; Identifying The Panel - Siemens SIMOSEC Operating Instructions Manual

832-6063.0 * MAINTENANCE SIMOSEC * REVISION 02
22.4

Checking corrosion protection

Scratches, impacts or bare spots in the surface painting of the switchgear enclosure can
produce corrosion.
Touch-up set Contents
8DX2 011 Paint pen in color "Light Basic SN700"
8DX2 012 Paint tin in color "Light Basic SN700"
on request Paint pen in color "light gray No. 61 per
ASTM D1535-97 (Munsell notation 8.3
G6.10/0.54) "
on request Paint tin in color "light gray No. 61 per
ASTM D1535-97 (Munsell notation 8.3
G6.10/0.54)"
22.5

Returning SIMOSEC switchgear to service

Follow the proceduces given in ''Placing SIMOSEC switchgear into service" (see
Installation, Page 65).
23

Access to the switchgear

23.1

Identifying the panel

The accessibility, safety measures and work operations are dependent on the panel
type. Identify the panel type and proceed accordingly.
Maintenance
Use
Scratches, impacts, bare spots
Scratches, impacts, bare spots
Scratches, impacts, bare spots
Scratches, impacts, bare spots
91