Siemens SIMOSEC Operating Instructions Manual page 94

Maintenance
94
Open screwed-on cable compartment door
Check panel grounding (see "Switching the three-position switch to GROUNDED
position" on page 77).
Remove the two screws securing the cable compartment door.
Fig 74: Screwed-on cable compartment door
Open the screwed-on cable compartment door.
Close the cable compartment door
To close the cable compartment door, proceed in reverse order.
Remove the screwed-on cable compartment cover
Check panel grounding (see "Switching the three-position switch to GROUNDED
position" on page 77).
Remove the 4 screws in the corners of the cable compartment cover.
Fig 75: Screwed-on cable compartment cover
Remove the screwed-on cable compartment cover.
Replace the screwed-on cable compartment cover
To replace the screwed-on cable compartment cover, proceed in reverse order.
REVISION 02 * MAINTENANCE SIMOSEC * 832-6063.0