Epson WF-C879R Series Setup And Administration Manual page 57

Setup & Administration Guide
You can set it from the Epson Print Admin Serverless Setting List > User Default Settings > Scan to Network
Folder/FTP or Scan/Copy > User Default Settings > Scan to Network Folder/FTP.
Item
Prohibit manual entry of destination
Editing the Home Screen (Web Config)
You can display only necessary icons by editing the icon layout displayed on the home screen for the control panel.
1. Select Epson Print Admin Serverless > Customize One-touch Functions from Epson Print Admin
Serverless Setting List.
Or access the Epson Open Platform tab > Epson Print Admin Serverless > Customize One-touch
Functions.
2. Select Enable from Customize One-touch Functions.
3. Select the layout of the icons displayed on the control panel from Maximum functions per screen. The image
changes according to the selected layout.
Important:
c
In the following cases, icons for the specified functions are not displayed on the home screen.
❏ When you select functions that are not permitted due to user restrictions.
❏ When the email address for a logged in user is not registered. (Scan to My Email)
❏ When the destination folder is not set. (Scan to My Folder)
4. Select the screen number from Screen(s).
Information Registration and System Configuration
Explanation
When enabled, the user cannot change the default destination.
57