Setup & Administration Guide
❏ When you changed the administrator password using the printer
Check that you changed the set password by selecting Options > Password manager.
❏ Check that the Epson Print Admin Serverless license key was recognized in Epson Device Admin.
Check the license status by the following method.
1. Run Epson Device Admin, and then select a target printer on the device list.
2. Check the text displayed in License Type of Epson Print Admin Serverless on the detailed device
information pane.
If license key is not recognized despite that you set it, acquire device information by clicking All Devices or
Selected Devices on ribbon menu.
❏ If you print a job without storing it in the printer, a report for Usage Per Department is not created.
Cannot Set Pull Printing
Check the following items.
❏ The printer you want to register is connected to the network.
❏ The IP address or FQDN of the printer you want to register is correct.
❏ Epson Print Admin Serverless is available.
❏ The printer you want to register supports Pull Printing.
Solving Problems
105