Removing The Power-Button Board; Prerequisites; Procedure - Alienware ALPHA Service Manual

Removing the Power-Button
Board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Remove the

Procedure

1
Disconnect the power-button board cable from the system board.
2 Turn the chassis over and remove the antenna cable from the routing
guides on the power-button module.
3 Press the tabs on the power-button module to release the module from
the front panel.
4 Release the tabs at the bottom of the power-button module from the slots
on the chassis.
Before Working Inside Your
base cover.
top cover.
Computer. For more safety best
Computer.
29