Steps
1. Lay the computer on its right side.
2. Align the top-chassis fan with the slot on the chassis.
3. Push the top-chassis fan into the slot on the chassis until its releasing clip is locked into place.
4. Connect the top-chassis fan cable to the system board.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Front AlienFX LED boards
Removing the Front AlienFX LED board
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
cover.
3. Remove the
top
cover.
4. Remove the
right-side
5. Remove the
front
bezel.
66
After working inside your
Before working inside your
cover.
computer.
computer.