Alienware Aurora Ryzen Edition R14 Service Manual page 88

Table 4. System setup options—Advanced menu (continued)
Advanced
SATA/NVME Operation
PCIe Resizable Base Address Register
PCIe Resizable Base Address Register
IPv4 HTTP Support
IPv4 HTTP Support
IPv6 HTTP Support
IPv6 HTTP Support
USB Configuration
Front USB Ports
Rear USB Ports
Power Options
Wake Up by Integrated LAN
AC Recovery
Deep Sleep Control
USB PowerShare
USB PowerShare in Sleep State
Auto Power On
Auto Power On Mode
Auto Power On Date
88
Sets the operating mode of the integrated storage device
controller.
Default: AHCI/NVME
Allows you to enable or disable the Resizable Base Address
Register (BAR) feature.
Default: Disabled
Allows you to enable or disable IPv4 HTTP Support.
Default: Disabled
Allows you to enable or disable IPv6 HTTP Support.
Default: Disabled
Allows you to enable or disable the Front USB Ports.
Default: Enabled
Allows you to enable or disable the Rear USB Ports.
Default: Enabled
Allow the computer to be powered on by special LAN signals.
Default: Enabled
Sets what action the computer takes when power is restored.
Default: Power Off
Allows you to define the controls when Deep Sleep is enabled.
Default: Enabled in S4 and S5
Allows you to charge external devices.
Default: Disabled
Allows you to enable front the USB devices to wake the system
from sleep state.
Default: Normal
Allows you to enable or disable Auto Power On.
Default: Disabled
Allows you to set the computer to turn on automatically every
day or on a preselected date. This option can be configured
only if the Auto Power On mode is set to Enabled Everyday or
Selected Day.
Default: Selected Day
Allows you to set the date on which the computer must turn
on automatically. This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31.
Default: 15