Installing The Pcie Fan - Alienware Aurora Ryzen Edition R14 Service Manual

Steps
1. Lay the computer on its right side.
2. Slide the release latch to the unlock position and lift the graphics-card end holder away from the chassis.
3. Disconnect the PCIe fan cable from the system board.
4. Push the tab to release the PCIe fan from the chassis.
5. Slide and lift the PCIe fan off the chassis.

Installing the PCIe fan

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the PCIe fan and provide a visual representation of the installation procedure.
63