Alienware Aurora Ryzen Edition R14 Service Manual page 89

Table 4. System setup options—Advanced menu (continued)
Advanced
Auto Power On Time
Numlock Key
Performance Options
CPU TCC offset
Overclocking Feature
Maintenance
Data Wipe on next boot
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
SupportAssist System Resolution
Auto OS Recovery Threshold
SupportAssist OS Recovery
Table 5. System setup options—Security menu
Security
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Allows you to set the time at which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Default: 12:30:30
Allows you to set the status of the Num Lock key during boot to
On or Off.
Default: Enabled
Allows you to configure the maximum CPU temperature within a
certain range of values.
Allows you to enable or disable the Overclocking Feature.
Default: Disabled
When enabled, the BIOS will schedule a data wipe cycle for all
storage devices that are connected to the system board on the
next reboot.
Default: Disabled
Enables the computer to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive or
an external USB key.
NOTE: BIOS Recovery from Hard Drive is not available for
Self-encrypting drives (SED).
Default: Enabled
When enabled, the autorecovery will be performed if BIOS
image integrity check fails and there is a a recovery image on
the hard drive.
NOTE: BIOS Auto-Recovery is not possible from other
media.
Default: Disabled
Controls the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery tool.
Allows you to configure the Auto OS Recovery Threshold.
Default: 2
Allows you to enable or disable the SupportAssist OS Recovery.
Default: Enabled
Displays the unlock setup status.
Displays whether the admin password is set.
Default: Not Set
Displays whether the system password is set.
Default: Not Set
Displays if the hard drive password is set.
89