Installing The Front Bezel - Alienware Aurora Ryzen Edition R14 Service Manual

Steps
1. Place the computer in an upright position.
2. Disconnect the front I/O-panel cable from the system board.
3. Pull the tabs of the front bezel from the slots on the front panel.
NOTE: Start with tab on top, proceed to the tabs on the left of the front bezel, and then to the tabs on the right of the front
bezel.
4. Pull the front bezel, together with the front I/O-panel cable, away from the chassis slowly.

Installing the front bezel

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
22