Top Bezel; Removing The Top Bezel - Alienware Aurora Ryzen Edition R14 Service Manual

Steps
1. Align the notch on the 2280 solid-state drive with the tab on the solid-state drive slot.
2. Insert the 2280 solid-state drive at a 45-degree angle into the system board.
3. Press the other end of the 2280 solid-state drive down and replace the screw (M2x3) that secures the 2280 solid-state drive to
the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in
3. Verify if the storage device is installed correctly (optional):
a. If you are replacing a storage device which does not have the operating system installed, follow the steps in
storage device in device
b. If you are replacing a storage device which does not have the operating system installed, follow the steps in
storage device in system setup
NOTE: To install the operating system on to your storage device, see Reinstall Windows to the Dell factory image using
recovery media in the knowledge base article 000176966.

Top bezel

Removing the top bezel

Prerequisites
1. Follow the procedure in
2. Remove the left-side cover.
3. Remove the top cover.
4. Remove the right-side
About this task
The following images indicate the location of the top bezel and provide a visual representation of the removal procedure.
After working inside your
manager.
(BIOS).
Before working inside your
cover.
computer.
computer.
Identifying
Identifying your
47