Installing The Processor Liquid-Cooling Assembly - Alienware Aurora Ryzen Edition R14 Service Manual

Steps
1. Lay the computer on the right side.
2. Disconnect the processor-cooling assembly cables from the system board.
3. In reverse sequential order, loosen the four captive screws that secure the processor cooler to the system board.
4. Remove the screw (M3x5) that secures the radiator and fan assembly to the chassis.
5. Lift the processor-cooling assembly along with the cables off the system board.

Installing the processor liquid-cooling assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
53