Removing The Front-Bezel Heat-Sensor; Prerequisites; Procedure - Alienware Area-51 R2 Service Manual

Removing the Front-bezel
Heat-sensor
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Remove both the left and right side-panels. See
Panels".
3 Remove the PCI fan. See

Procedure

NOTE: After removing the PCI fan, locate the sensor on the fan shroud.
1 Lay the computer on the left side.
2
Press the release tab on the securing clip.
3 Pry out the chassis heat-sensor cable from the securing clip.
86
Before Working Inside Your
stability foot.
"Removing the PCI
Computer. For more safety best
"Removing the Side
fan".
Computer.