At+Qgpscfg="Gsvextnmeatype" Enable/Disable Gnss Extended Ggsv - Quectel LTE Standard Application Note

Reference
Parameter
<DPO_enable>
<errcode>

2.1.10. AT+QGPSCFG="gsvextnmeatype" Enable/Disable GNSS Extended GGSV

This command is used to enable/disable GNSS extended GGSV. It will take effect after the module is
rebooted.
AT+QGPSCFG="gsvextnmeatype" Enable/Disable GNSS Extended GGSV
Write Command
AT+QGPSCFG="gsvextnmeatype"[,<
gsvext_NMEA_type>]
LTE_Standard_GNSS_Application_Note
ERROR
When the second parameter is not specified, query the
current setting:
+QGPSCFG: "dpoenable",<DPO_enable>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Integer type. Enable/Disable DPO. The setting will be automatically saved to
NVRAM.
0 Disable DPO
1 Enable the DPO with dynamic duty cycle
2 Enable the DPO only if the phone is not connected to an external
power supply (not running on battery)
Integer type. The error code of operation. Please refer to Chapter 4 for details.
Response
When two parameters are specified, configure the GNSS
extended GGSV:
OK
Or
ERROR
When the second parameter is not specified, query the
current setting:
+QGPSCFG: "gsvextnmeatype",<gsvext_NMEA_type>
OK
If there is any error related to ME functionality:
LTE Standard Module Series
LTE Standard GNSS Application Note
17 / 39