At+Qgpsxtradata Inject Gpsonextra Data File - Quectel LTE Standard Application Note

1 Force acceptance of data. This value is recommended.
<uncrtn> Uncertainty of time. Unit: ms. Default value: 3500ms. It indicates the time difference
between sending a request to the SNTP server and receiving a response from the SNTP
server.
<errcode> Integer type. The error code of operation. Please refer to Chapter 4 for details.

2.11. AT+QGPSXTRADATA Inject gpsOneXTRA Data File

This command is used to inject a gpsOneXTRA assistance data file to the GNSS engine. Before operating
this command, gpsOneXTRA must be enabled, valid gpsOneXTRA data file must be stored into RAM or
UFS (UFS is recommended) of the module and gpsOneXTRA time be injected to GNSS engine. After
operating this command successfully, gpsOneXTRA data file can be deleted from RAM or UFS, and
whether the gpsOneXTRA data is injected successfully can be queried via AT+QGPSXTRADATA?.
AT+QGPSXTRADATA Inject gpsOneXTRA Data File
Test Command
AT+QGPSXTRADATA=?
Read Command
Query the status of gpsOneXTRA data
files
AT+QGPSXTRADATA?
Write Command
Inject gpsOneXTRA data files
AT+QGPSXTRADATA=<xtradatafilena
me>
Reference
LTE_Standard_GNSS_Application_Note
LTE Standard GNSS Application Note
Response
+QGPSXTRADATA: <xtradatafilename>
OK
Response
+QGPSXTRADATA: <xtradatadurtime>,<injecteddatatim
e>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Response
OK
Or
ERROR
If there is any error related to ME functionality:
+CME ERROR: <errcode>
LTE Standard Module Series
33 / 39