Table of Contents
Advertisement
Parameter
<xtraenable>
Integer type. Enable/disable gpsOneXTRA Assistance function, and the parameter
configuration will be automatically saved to NVRAM.
0
1
<errcode>
Integer type. The error code of operation. Please refer to Chapter 4 for details.
2.10. AT+QGPSXTRATIME Inject gpsOneXTRA Time
This command can be used to inject gpsOneXTRA time to GNSS engine. Before using it, gpsOneXTRA
Assistance function must be enabled via AT+QGPSXTRA=1 command. After activating the function, the
GNSS engine will ask for gpsOneXTRA time and assistance data file. Before injecting gpsOneXTRA data
file, gpsOneXTRA time must be injected first via this command. This command takes effect immediately.
AT+QGPSXTRATIME Inject gpsOneXTRA Time
Test Command
AT+QGPSXTRATIME=?
Write Command
Inject gpsOneXTRA time
AT+QGPSXTRATIME=<type>,<xtratim
e>,<utc>,<force>,<uncrtn>
Reference
Parameter
<type>
Type of injecting time.
0
Inject XTRA time manually
1
Inject time through SNTP once. This type is disabled currently.
<xtratime> Current UTC time.
Format: YYYY/MM/DD,hh:mm:ss. e.g. 2019/01/05,08:30:30.
<utc>
UTC or GPS time that gpsOneXTRA time refers to.
0
GPS time
1
UTC time. This value is recommended.
<force>
Whether to force GNSS to accept the data.
0
Not force GNSS to accept the data
LTE_Standard_GNSS_Application_Note
Disable gpsOneXTRA Assistance
Enable gpsOneXTRA Assistance
Response
+QGPSXTRATIME: 0,<xtratime>,(0,1),(0,1),<uncrtn>
OK
Response
OK
Or
ERROR
If there is any error related to ME functionality:
+CME ERROR: <errcode>
LTE Standard Module Series
LTE Standard GNSS Application Note
32 / 39
Advertisement
Table of Contents
