Maktec MT582 Instruction Manual
  1. Manuals
  2. Brands
  3. Maktec Manuals
  4. Saw
  5. MT582
  6. Instruction manual

Maktec MT582 Instruction Manual

Hide thumbs Also See for MT582:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Circular Saw
MT582
011193
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Maktec MT582

Summary of Contents for Maktec MT582

  • Page 1 INSTRUCTION MANUAL Circular Saw MT582 011193 DOUBLE INSULATION IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model MT582 Blade diameter 185 mm - 190 mm at 90° 68 mm when using 190 mm diameter blade at 45° 46 mm Max. cutting depth at 90° 66 mm when using 185 mm diameter blade at 45°...

  • Page 3: General Power Tool Safety Warnings

    Avoid body contact with earthed or grounded Circular Saw surfaces such as pipes, radiators, ranges and Model No./ Type: MT582 refrigerators. There is an increased risk of are of series production and electric shock if your body is earthed or grounded.

  • Page 4: Circular Saw Safety Warnings

    GEB013-6 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves CIRCULAR SAW SAFETY away from moving parts. Loose clothes, WARNINGS jewellery or long hair can be caught in moving parts. Cutting procedures 17. If devices are provided for the connection of DANGER: Keep hands away from cutting dust extraction...
  • Page 5 Kickback causes and related warnings kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator;...
  • Page 6 Lower guard function 18. Check lower guard for proper closing before Fig. 1 each use. Do not operate the saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent.

  • Page 7: Functional Description

    32. Keep blade sharp and clean. Gum and wood FUNCTIONAL DESCRIPTION pitch hardened on blades slows saw and increases potential for kickback. Keep blade clean by first removing it from tool, then cleaning it with CAUTION: gum and pitch remover, hot water or kerosene. Always be sure that the tool is switched off and •...
  • Page 8 Sighting ASSEMBLY 1. Base plate CAUTION: Always be sure that the tool is switched off and • unplugged before carrying out any work on the tool. Removing or installing saw blade CAUTION: Be sure the blade is installed with teeth pointing up •...

  • Page 9: Operation

    For tool with the inner flange for a other than 15.88 OPERATION mm hole-diameter saw blade 1. Mounting shaft CAUTION: 2. Inner flange Be sure to move the tool forward in a straight line • 3. Saw blade gently. Forcing or twisting the tool will result in 4.

  • Page 10: Maintenance

    MAINTENANCE CAUTION: Always be sure that the tool is switched off and • unplugged before attempting to perform inspection or maintenance. Never use gasoline, benzine, thinner, alcohol or the • like. Discoloration, deformation or cracks may result. Replacing carbon brushes 1.
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884973C229...

Table of Contents