Related Manuals for Maktec 5606B
Summary of Contents for Maktec 5606B
- Page 1 INSTRUCTION MANUAL Circular Saw 5606B 5806B 004086 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model 5606B 5806B Blade diameter 160 mm 185 mm at 90° 55 mm 66 mm Max. cutting depth at 45° 36 mm 44 mm No load speed (min 5,200 5,200 Overall length 268 mm 282 mm Net weight 3.4 kg... -
Page 3: Circular Saw Safety Warnings
electric shock. accessories, or storing power tools. Such If operating a power tool in a damp location is preventive safety measures reduce the risk of unavoidable, use a residual current device starting the power tool accidentally. (RCD) protected supply. Use of an RCD reduces 21. - Page 4 kickback forces can be controlled by the operator, if proper precautions are taken. 10. When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the saw motionless in the material until the blade comes to a complete stop. Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or kickback may occur.
- Page 5 cause binding and kickback. it takes for the blade to stop after switch is 15. Use extra caution when sawing into existing released. walls or other blind areas. The protruding blade 22. To check lower guard, open lower guard by may cut objects that can cause kickback.
-
Page 6: Functional Description
27. Before setting the tool down after completing FUNCTIONAL DESCRIPTION a cut, be sure that the lower guard has closed and the blade has come to a complete stop. 1. Screw 28. Never attempt to saw with the circular saw held upside down in a vise. - Page 7 For straight cuts, align the A position on the front of the Use only the Makita wrench to install or remove the • base with your cutting line. For 45° bevel cuts, align the B blade. position with it. To remove the blade, press the shaft lock so that the blade cannot revolve and use the wrench to loosen the Switch action hex bolt counterclockwise.
-
Page 8: Operation
Side grip (auxiliary handle) (Accessory) MAINTENANCE 1. Side grip CAUTION: Always be sure that the tool is switched off and • unplugged before attempting to perform inspection or maintenance. Never use gasoline, benzine, thinner, alcohol or the • like. Discoloration, deformation or cracks may result. - Page 9 If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Saw blades • Rip fence (Guide rule) • Hex wrench • Wrench holder • Grip assembly • NOTE: Some items in the list may be included in the tool •...
- Page 12 Makita Corporation www.makita.com 884055F986...