Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Maktec Manuals
  4. Saw
  5. MT582
  6. Technical information

Maktec MT582 Technical Information

Circular saw 190mm
Hide thumbs Also See for MT582:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Model MT582 has been developed as the aesthetic change
model of maktec circular saw MT580, featuring
Industrial performance and durability at less expense
In compliance with the regulations of the EC directives
Ergonomically designed soft grip covered with non-slip
elastomer
S
pecification
Voltage (V)
110
120
220
230
240
No load speed: min
Diameter: mm (")
Size of blade
Hole diameter: mm (")
Max. cutting capacities:
mm (") at 45 degrees
Protection from electric shock
Power supply cord: m (ft)
Weight according to
EPTA-Procedure 01/2003*: kg (lbs)
* with Dust nozzle and TCT saw blade (Part No. 726083-9)
S
tandard equipment
Guide rule ............................... 1 pc
Hex wrench 5 ........................... 1 pc
Dust nozzle .............................. 1 pc (for European countries only)
TCT saw blade ......................... 1 pc
Note: The standard equipment for the tool shown above may vary by country.
MT582
Circular Saw 190mm (7-1/2")
Cycle (Hz)
Current (A)
10
50/60
8.5
50/60
5.0
50/60
4.8
50/60
4.6
50/60
= rpm
-1
at 0 degree
H
L
Continuous Rating (W)
Input
Output
1,050
650
----
570
1,050
650
1,050
650
1,050
650
4,900
190 (7-1/2)
30 (1-3/16) or 20 (13/16)
68 (2-11/16)
46 (1-13/16)
Double insulation
2.0 (6.6)
4.0 (8.8)
PRODUCT
P 1/10
W
Dimensions: mm (")
Length (L)
297 (11-3/4)
Width (W)
232 (9-1/8)
Height (H)
255 (10)
Max. Output (W)
1,300
1,300
1,300
1,300
1,300
185 (7-1/4)
66 (2-5/8)
44 (1-3/4)

Advertisement

loading

Related Manuals for Maktec MT582

Summary of Contents for Maktec MT582

  • Page 1 Description Circular Saw 190mm (7-1/2") ONCEPT AND MAIN APPLICATIONS Model MT582 has been developed as the aesthetic change model of maktec circular saw MT580, featuring Industrial performance and durability at less expense In compliance with the regulations of the EC directives...
  • Page 2 P 2/ 10 epair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [1] NECESSARY REPAIRING TOOLS Code No. Description Use for 1R003 Retaining ring S pliers ST-2N Removing / Mounting Retaining ring S-38 1R032 Bearing setting plate 8.2 Removing Helical gear 38 1R217 Ring 22...
  • Page 3 P 3/ 10 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Base DISASSEMBLING 1) Disassemble the Nut and Bolt on the Lever plate side. (Fig. 3) Then remove a stopper for Safety cover. (Fig. 4) Fig. 3 1. Loosen M8-13 Hex nut halfway 2. Remove Bow stop ring E-12 3.
  • Page 4 P 4/ 10 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Base (cont.) DISASSEMBLING 2) Disassemble the Nut and Screw on Angular plate side. (Fig. 5) Fig. 5 6. Loosen M5 Pan head screw while blocking 7. Remove M5 Pan head screw, M5 Hex nut and M5 Hex nut with Wrench 8.
  • Page 5 P 5/ 10 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Base ASSEMBLING 1) Joint Base with Blade case complete on the Angular plate side. (Fig. 5) 2) Insert M8x24 Flat head square neck bolt through Blade case complete and Depth guide on Base. (right in Fig. 4) 3) Turn Safety cover clockwise, then assemble Rubber sleeve 6 to Blade case complete by fastening with M6x20 Pan head screw.
  • Page 6 P 6/ 10 epair [3] DISASSEMBLY/ASSEMBLY [3]-2. Armature (cont.) DISASSEMBLING 2) Remove Armature from Blade case complete, then disassemble Ball bearings from Armature. (Fig. 9) Fig. 9 5. Use Water pump pliers to clamp the claws 3. Pull out Armature from Blade case 4.
  • Page 7 P 7/ 10 epair [3] DISASSEMBLY/ASSEMBLY [3]-3. Blade case complete, Safety cover DISASSEMBLING 1) Disassemble Safety cover. (Fig. 11) Fig. 11 1. Remove Retaining ring S-38 2. Remove Tension spring 4 with 1R003. and Safety cover. Tension spring 4 Retaining ring S-38 Safety cover 2) Remove Motor housing from Blade case complete.
  • Page 8 P 8/ 10 epair [3] DISASSEMBLY/ASSEMBLY [3]-4. Bearing box, Helical gear 38 DISASSEMBLING 1) Disassemble Safety cover. (Fig. 11) 2) Disassemble Bearing box. (Fig. 12) 3) Remove Spindle and Helical gear 38 from Bearing box. (Figs. 14, 15, 16) Fig. 14 2.
  • Page 9 P 9/ 10 epair [3] DISASSEMBLY/ASSEMBLY [3]-4. Bearing box, Helical gear 38 (cont.) DISASSEMBLING 4) Remove Ball Bearing 6201ZZ from Bearing box. (Fig. 17) Fig. 17 1. Remove Thickness ring before setting 3. Spindle can be used as a jig for removing Bearing box to vise.
  • Page 10 P 10/10 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black White This Lead wire is brown for some countries. Switch Power supply cord Field Noise This Lead wire is blue Noise suppressor is not suppressor for some countries. used for some countries.