Maktec MT450 Instruction Manual
Hide thumbs
Also See for MT450:
- Instruction manual (45 pages) ,
- Instruction manual (37 pages) ,
- Instruction manual (20 pages)
Related Manuals for Maktec MT450
Summary of Contents for Maktec MT450
- Page 1 INSTRUCTION MANUAL Recipro Saw MT450T MT450 014369 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
Be sure that you understand their meaning before use. Sound power level (L ) : 98 dB (A) ･ Read instruction manual. Uncertainty (K) : 3 dB (A) Model MT450 ･ DOUBLE INSULATION Sound pressure level (L ) : 88 dB (A) ･... -
Page 3: General Power Tool Safety Warnings
Recipro Saw Do not expose power tools to rain or wet Model No./ Type: MT450T, MT450 conditions. Water entering a power tool will Conforms to the following European Directives: increase the risk of electric shock. - Page 4 GEB008-6 15. Do not overreach. Keep proper footing and balance at all times. This enables better control RECIPRO SAW SAFETY of the power tool in unexpected situations. WARNINGS 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves Hold power tool...
-
Page 5: Functional Description
FUNCTIONAL DESCRIPTION 1. Switch trigger 2. Lock button CAUTION: Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Adjusting the shoe 1. Shoe 014350 2. Shoe button To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. - Page 6 Switch off and unplug the tool from the mains 2. Insulation cover before working on the blade clamp lever. Installing or removing the saw blade for Model MT450 CAUTION: Always clean out all chips or foreign matter • adhering to the blade, blade clamp and/or slider.
-
Page 7: Operation
Remove and check the carbon brushes regularly. OPERATION Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same CAUTION: time. Use only identical carbon brushes. Always hold the tool firmly with one hand on •... - Page 8 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885258A226...