The inflatable motor boat of the "FALCON" series relates to the category of pleasure boats and is intended for water sports, hunting and fishing, tourism, the use as a floating means on board of launches, yachts and other vessels. Model F275 F300 F330...
The valve has two positions of sliding part A corresponding to its two Inflation/deflation valve conditions (modes): – sliding part A is withdrawn - operation condition of the valve (compartment air filling mode); – sliding part A is recessed - valve in condition "OPEN" (compartment air discharge mode).
When mounting the outboard engine make sure that it is reliably MAINTENANCE fixed to the transom. In addition, take every precaution to avoid Main conditions of long service life is right and careful servicing. any contacts of the fuel with the boat surfaces. Avoid excessive increasing of pressure in the board, especially from heating by the sun rays.
OPERATING REGULATIONS Proper usage of boat equipment and accessories Use the boat equipment and accessories only on their direct Dear user, purpose to ensure reliable service. We thank your for your purchase and do hope that you will have a great fun of it. However, to make your joy and pleasure Availability of Oars Even when sailing with an outboard engine you should always have complete, we would request you to read carefully and observe...
Page 7
Towing At towing the towing rope length should not be at least 3 lengths The "BRIG" Company employees would like to wish you a of the boat, the rope being secured to both boats in a manner pleasant and safe leisure time! ensuring its immediately, single-motion release.
Page 8
inflatable boats MODEL SERIAL No. Date of manufacture Quality inspection stamp...