Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety guideline
BEWARE:
The use of this device is allowed only with fault current protection switch with a triggering nominal cur -
rent up to 30 mA (according to VDE 0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or the follow the instructions, made by this person on how to
use the device correctly. Children should be supervised to make sure that they do not play with the
device.
CAUTION:
The head of the vacuum pump (with cooling fins) can get very hot.
Run a visual inspection of the device before every use. Do not use the device if the safety ap-
pliances are damaged or worn out. Never override safety regulations.
Use the device exclusively according to the intended purpose stated in the manual.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but has to be replaced with a new one. This work can only be carried out by an electrician.
The 230 V alternating voltage indicated on the type plate of the device has to correspond to
the existent mains voltage.
Never lift, carry or fix the device by using the power cable.
Make sure that the electrical plug connection is protected from flood and moisture.
Disconnect the mains plug before starting the maintenance work at the compressor.
The user is responsible for complying with the location specific safety and mounting regula-
tions. Ask an electrician, if necessary.
In case of device failure the repairs can only be carried out by an electrician.
SAFETY GUIDELINES:
The user should choose the right vacuum pump with the appropriate air volume and air pres -
sure to correspond to the actual work requirements.
Never expose the device to dust, acid, steam, explosive or flammable gases, or atmospheric
influences (rain, sun, fog, snow).
The vacuum pump can be operated only in an appropriate environment (good ventilation, am-
bient temperature of +5–+40
Never use the vacuum pump barefoot or with wet hands or feet.
Never allow children to touch the switched-on vacuum pump or to insert the plug. It may cause
burns or electric shocks.
Do not open or damage any vacuum pump part. If necessary, please contact your seller.
Always release the water by opening the drain valve before not using the vacuum pump for a
long time. Store the vacuum pump in a well ventilated place.
Always wear goggles. Under no circumstances direct the airflow towards your body or other
persons' bodies or animals.
Never use the device in areas with steam or moisture or close to water.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
℃
).
Item 34243
Page 3
03
2021-1
Advertisement
