Advertisement
Quick Links
Operation Manual
Waste Water Pump
51537–51541
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ slightly.
Advertisement
Related Manuals for WilTec 51537
Summary of Contents for WilTec 51537
- Page 1 Operation Manual Waste Water Pump 51537–51541 Similar to image, may vary depending on model Read and follow the operating instructions and safety information before use. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ slightly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Use cables with a sufficient size to minimise a voltage drop to the motor. Do not touch a running motor. Modern motors can reach very high temperatures when run- ning. © by WilTec Wildanger Technik GmbH Item 51537–51541 Page 3 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
- Page 4 If the main cable or the socket has been damaged due to external influences, repairs on the cable are prohibited. Repair-work may only be carried out by a qualified technician. © by WilTec Wildanger Technik GmbH Item 51537–51541 Page 4 http://www.WilTec.de...
- Page 5 3. Clean the drive wheel with clear water. Important! The pump must not be placed on the drive wheel. 4. Build the pump back together in the reversed order. © by WilTec Wildanger Technik GmbH Item 51537–51541 Page 5 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 The cover can then be pushed away downward. We recommend tilting the pump sideways, to re- move the cover easier. © by WilTec Wildanger Technik GmbH Item 51537–51541 Page 6 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
- Page 7 With this assembly, the switch-on point is at 40 mm water level/ 60 mm depending on the pump variation. See the following table. Item number Switch-on point (mm) 51537 51538 51539 51540 51541 © by WilTec Wildanger Technik GmbH Item 51537–51541 Page 7 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
-
Page 8: Troubleshooting
Water too hot, thermal switch Ensure that the maximal water stops pump temperature does not exceed 35 ℃ © by WilTec Wildanger Technik GmbH Item 51537–51541 Page 8 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de... - Page 9 Max. discharge head (m) Max. immersion depth (m) ℃ Max. water temperature ( Hose connections (cm) 2.54 (1”), 3.17 (1¼”), 3.81 (1½”) Max. Ø of foreign bodies (mm) © by WilTec Wildanger Technik GmbH Item 51537–51541 Page 9 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
- Page 10 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with do- mestic waste.