Download Print this page

WilTec AS29 Operation Manual page 4

Vacuum pump

Advertisement

Switch off the vacuum pump if you do not use it. Disconnect it from mains before you repair,
recondition, maintain, clean or replace parts. Never use the power cable as handle. Keep the
power cable away from hot objects, oil and sharp edges. Protect it against breakage. Do not
pull the power cable in order to unplug it from the power socket.
If the vacuum pump is used outdoors, only approved extensions may be used. Every wire of
the extension cable must have at least 1.5 mm² cross-section.
Do not store the vacuum pump with the plug inserted into the socket. Do not allow children or
any other people who are not able to handle this device to play or work with it.
Be very careful when you are working with the vacuum pump. Do not use it if you are tired.
Persons under the influence of alcohol, drugs or medication are not allowed to use this device.
When you start working make sure that all screws are tightened.
Do not use the vacuum pump if it is damaged. If the vacuum pump generates unusual noises
and strong vibrations or if other unusual signs occur that indicate some damage you should
turn off the vacuum pump immediately. For repairs please use only original spare parts. Do
not make any technical modifications to the vacuum pump. In case you cannot eliminate the
malfunction hand over the device to an expert.
Properties
Diaphragm vacuum pump
Without oil, no untidy air
Protection against excessive temperature
Very low noise level
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 34243
Page 4
03
2021-1

Advertisement

loading

This manual is also suitable for:

34243