Download Print this page

Safety Instructions - WilTec 50374 Operation Manual

Swimming pool circulation pump
Hide thumbs Also See for 50374:

Advertisement

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Utilisation
The swimming pool pumps are designed for use in small pools (family use), whirlpools and sauna
pools.

Safety instructions

Attention!
In standing water, garden and swimming ponds and in their vicinity, the use of the device is only
permitted with a residual current circuit breaker with a tripping current of up to 30  mA (according to
VDE 0100 parts 702 and 738).
Maintain a safe distance from the swimming pool and fix the pump on a stable base plate. According
to the VDE standard, a safety distance of 2 m must be maintained.
This device is not intended to be used by persons (including children) with limited physical, sensory or
mental capabilities or a lack of experience and / or knowledge, unless they are supervised by a person
responsible for their safety or have obtained instructions on how to use the device.
Children should be supervised to ensure that they do not play with the device.
Attention!
Perform a visual inspection of the device before each use. Do not use the device if safety
devices are damaged or worn. Never override safety devices.
Only use the device in accordance with the intended use specified in these operating
instructions.
You are responsible for the safety in the work area.
If the cable or the plug is damaged due to external influences, the cable must not be repaired!
The cable must be exchanged for a new one. This work should only be carried out by a
qualified electrician.
The voltage of 230 V AC specified on the rating plate of the device must correspond to the
existing mains voltage.
Never lift, transport or fasten the device by the power cord.
Make sure that the electrical plug connections are in the flood-proof area or are protected from
moisture.
Pull the power plug before working on the device.
Avoid exposing the device to direct water jets or rain.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 50374–50377
Page 3
11 2020-1

Advertisement

loading

This manual is also suitable for:

503755037650377