Advertisement
Quick Links
Operation Manual
50982- CET-80000
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificant-
ly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 12
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Related Manuals for WilTec CET-80000
Summary of Contents for WilTec CET-80000
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificant- Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 12 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wil- danger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
-
Page 3: Safety Instructions
11> The external aluminum alloy radiator of the controller can dispatch heat well . 12> With anti-blocking and anti-idling function ( immediately cut off power automati- cally if impeller blocked, immediately cut off power automatically if pump run idling) © by WilTec Wildanger Technik GmbH Seite 14 http://www.WilTec.de http://www.aoyue.eu... -
Page 4: Installation
5> Do not place the pump directly in the ponds floor that have mud, place it on a raised surface. 6> Connect the pump with the controller of four core wire (PIC 1), lock the nut as shown in PIC 2 © by WilTec Wildanger Technik GmbH Seite 15 http://www.WilTec.de http://www.aoyue.eu... - Page 5 SP03 4600 2000L SP04 5000 2600L 50982 SP05 5400 3200L 110V~22V (CET- 50~60HZ SP06 5800 3500L 8000) SP07 6200 3800L SP08 6700 4500L SP09 7200 4800L SP10 8000 5100L © by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 6 ER03 pump work without water Abnormal ER02 pump block Abnormal check the impeller if block ER01 over/under voltage display Abnormal check voltage © by WilTec Wildanger Technik GmbH Seite 17 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 7: Maintenance & Cleaning
Damage of the impeller change impeller inlet and outlet obstruction clean the inlet and outlet Pump water shortage filter case obstruction clean filter case low voltage adjust voltage © by WilTec Wildanger Technik GmbH Seite 18 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 8 DRAWING NAME NAME Bottom foot ceramic bearing filter case motor with cable outlet rear cover seal circle handle impeller cover rubber foot rotor set Gear box with cable O-Ring © by WilTec Wildanger Technik GmbH Seite 19 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 9 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.